Refitting Inner Wing Mudshields

Just got a few things left to finish before taking the 109 for it’s first MOT in 3 years. I’ve just fitted the inner wing mudshields in place, the bottom end of these are usually bolted directly to the footwell of the bulkhead however the area where the mudshield meets the footwell tends to be a rot trap as all sorts of soggy things end up stuck down there like soggy leaves and mud etc.

To avoid this happening I’ve used some 10mm nylon spacers to open up enough space for water, leaves mud etc to drop through to the floor instead of getting stuck there.

Comments are closed.